Cart SubtotalAED 0.00

Documenting Process Calibrator With Increased Accuracy, 100mV to 300V DC, 30 to 110mA

Model # 753
AED 27,405.00Incl. of VAT
AED 30,450.0010% Off
Limited Stock
Use Coupon Code: WELCOME25
This item is eligible for return.
Delivery
Friday, Jun 2
FREE
Click & Collect
Today, 9:00 AM - 4:30 PM
FREE

Features

  • Source/simulate volts; mA; thermocouples; RTDs; frequency; ohms; and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more.
  • Offers compatibility with DPCTrack2 and many other asset management software packages
  • Bright white dual display for reading both sourced and measured parameters simultaneously
  • Easy-to-use multi-lingual interface

Items Included

  • BC7240 battery charger
  • Li-on BP7240 battery pack
  • DPCTrack 2
  • Sample Software Instruction manual
  • NIST-traceable calibration report and data
  • Three sets of TP220 test probes with three sets of Ã’extended tooth” alligator clips
  • Two sets AC280 hook clips
  • C799 Soft Field Case
  • USB communication cable

Specifications

  • Voltage Measurement100 mV, 3 V, 30 V, 300 V DC
  • Voltage Measurement3(40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V AC
  • Current Measurement30 mA, 110 mA DC
  • Resistance10Ω, 100Ω, 1 kΩ, 10 kΩ
  • Frequency1.00 to 110.00 Hz/0.01 Hz,
  • Ramp Rate4 steps/second
  • Data Logging1, 2, 5, 10, 20, 30, or 60 readings/minute
  • Loop Power VoltageSelectable, 26 V
  • Operating Temperature14 to 122°F (-10 to 50°C)
  • Storage Temperature-4 to 140°F (-20 to 60°C)
  • Dust/Water ResistanceMeets IP52, IEC 529
  • Dimensions5.4 x 9.6 x 2.5" (136 x 245 x 63 mm)
  • Warranty3 years manufacturer's warranty
Maintive. All Rights Reserved