Fluke 754 Documenting Process Calibrator With HART Communications, 100mV to 300V DC, 30 to 110mA is a product engineered with precision, delivering exceptional performance
with features like sourcesimulate volts mA thermocouples RTDs frequency ohms and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measuresource pressure using any of 29 Fluke 700Pxx Pressure Modules, create and run automated asfoundasleft procedures to satisfy quality programs or regulations Record and document results and holds up to a full week of downloaded procedures and calibration results.
Maintive brings to you 100% genuine Multifunction Calibrators from Fluke at your doorstep with fast shipping, multiple and secure payment methods and easy returns. Order 754 Documenting Process Calibrator With HART Communications, 100mV to 300V DC, 30 to 110mA today at the best price only from Maintive.
Features
Source/simulate volts; mA; thermocouples; RTDs; frequency; ohms; and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Holds up to a full week of downloaded procedures and calibration results.
Use many features like autostep; custom units; user entered values during test; one-point and two-point switch testing; square root DP flow testing; programmable measurement delay etc.
Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
Measures/sources pressure using any of 29 Fluke 700Pxx Pressure Modules
Provides easy-to-use multi-lingual interface
Features a bright white dual display for reading both sourced and measured parameters simultaneously
Includes rechargeable Li-Ion battery for 10 hour uninterrupted use
Items Included
BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2
Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of Ã’extended tooth” alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable
Fluke 754HHC HART communications cable
Specifications
Voltage Measurement100 mV, 3 V, 30 V, 300 V DC
Voltage Measurement3(40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V AC
Current Measurement30 mA, 110 mA DC
Resistance10Ω, 100Ω, 1 kΩ, 10 kΩ
Frequency1.00 to 110.00 Hz/0.01 Hz,
Ramp Rate4 steps/second
Data Logging1, 2, 5, 10, 20, 30, or 60 readings/minute
Loop Power VoltageSelectable, 26 V
Operating Temperature14 to 122°F (-10 to 50°C)
Storage Temperature-4 to 140°F (-20 to 60°C)
Dust/Water ResistanceMeets IP52, IEC 529
Dimensions5.4 x 9.6 x 2.5" (136 x 245 x 63 mm)
Warranty3 years manufacturer's warranty
Voltage Measurement100 mV, 3 V, 30 V, 300 V DC
Voltage Measurement3(40 to 500 Hz)/0.001 V, 30 (40 to 500 Hz)/0.01 V, 300 (40 to 500 Hz)/0.1 V AC
Current Measurement30 mA, 110 mA DC
Resistance10Ω, 100Ω, 1 kΩ, 10 kΩ
Frequency1.00 to 110.00 Hz/0.01 Hz,
Ramp Rate4 steps/second
Data Logging1, 2, 5, 10, 20, 30, or 60 readings/minute